Rear Control Arm Lower Rear - Outer Bushing Kit Double Offset to Suit Holden Commodore VE, VF and HSV

Rear Control Arm Lower Rear - Outer Bushing Kit Double Offset to Suit Holden Commodore VE, VF and HSV

Details:

Foot Note 2: Adds +/-1.5deg camber

Foot Note 3: Limited Lifetime Warranty

Sub Brand: Replacement

Components Per: 8 Bushings, 4 Tubes

Fitting Position: outer

Wheel Alignment: Yes

Installation Difficulty: Tricky installation may take longer then you think if you are not experienced, we reccomend you use our click & fit service.

Installation time: 3 Hours

Kit Contents: 8 Bushings, 4 Tubes

Descriptions:

Benefit Note:

Providing +/- 1.5deg camber adjustment (on car), Whiteline's kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. Providing +/- 1.5deg camber adjustment (on car), WHITELINE'S kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.

Vehicle Types;

• Make/Model: CHEVROLET CAMARO, Chassis Group: 2009-2015 | CAMARO 5TH GEN, Important Note: Performance Alignment - adds +/- 1.5deg camber - replaces both control arm outer and trailing arm rear bushing
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE INTERCEPTOR RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VC RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VH RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VK RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VL RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN CALAIS, Chassis Group: 2006-2013 | CALAIS VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN CAPRICE, Chassis Group: 2006-2013 | CAPRICE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN COMMODORE, Chassis Group: 2006-2013 | COMMODORE VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN STATESMAN, Chassis Group: 2006-2010 | STATESMAN WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV CLUBSPORT, Chassis Group: 2006-2013 | CLUBSPORT E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV GRANGE, Chassis Group: 2007-2013 | GRANGE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV GTS, Chassis Group: 2006-2013 | GTS E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV MALOO, Chassis Group: 2007-2013 | MALOO E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV SENATOR, Chassis Group: 2006-2013 | SENATOR E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV W427, Chassis Group: 2008-2013 | W427 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: VAUXHALL VXR8, Chassis Group: 2007-2013 | VXR8 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts

What does "Will be special ordered for you" mean?

This means that we do not have the product in our warehouse. We only order “Special Order” products from the supplier when you order them from us. Generally, we do not intend to keep an inventory of these items. Therefore, returns are not possible.

“Special Order” products could be shipped directly from the supplier or they could be shipped to us first. Then, we would ship it to you. The available shipping options will be provided during the checkout process.